8 (800) 333-41-10

8 (495) 966-18-90

EN

RU
EN
FR

Equipment

Coiling and decoiling

Decoilers

Floor-standing

HP-700

Floor-standing metal decoiler HP-700

Lightweight floor-standing decoiler MOBIPROF HP-700 designed for uncoiling rolls weighing up to 300 kg and up to 700 mm wide.

Specifications:

300 kg

Maximum load

700 mm

Coil width

any

Inner Ø of coil

HP-1250

Floor-standing metal decoiler НР-1250

Lightweight floor-standing decoiler HP-1250 designed for uncoiling rolls weighing up to 300 kg and up to 1 250 mm wide.

Specifications:

300 kg

Maximum load

1 250 mm

Coil width

any

Inner Ø of coil

Mobile

RM2S-625

Decoiler on wheels RM2S-625

Free movement of the decoiler is provided by four wheels with a brake. Self-centering mandrel for easy installation of coils.

Specifications:

2000 kg

Maximum load

625 mm

Coil width

400-580

Inner Ø of coil

RM2S

Decoiler on wheels with brakes RM2S

Free movement of the decoiler is provided by four wheels with a brake. Self-centering mandrel for easy installation of coils.

Specifications:

2000 kg

Maximum load

1250 mm

Coil width

400-580 mm

Inner Ø of coil

Double-support

RM-1250

Manual double-support coil decoiler RM-1250

To work with coils of different widths, the crosspieces can be set at any point of the shaft. To secure the roll, each special support on both crosspieces is expanded.

Specifications:

8 000 kg

Maximum load

1250 mm

Coil width

480-620 mm

Inner Ø of coil

On demand

RM-1500

Manual double-support coil decoiler RM-1500

To work with coils of different widths up to 1500 mm, the crosspieces can be set at any point of the shaft. To secure the roll, each special support on both crosspieces is expanded.

Specifications:

8 000 kg

Maximum load

1500 mm

Coil width

480-620 mm

Inner Ø of coil

On demand

RMSC-1250

Manual double-support decoiler RMSC-1250

Self centering coil holder is easy to install and fix inside of the metal coil. It is based on a two-bearing double-support frame.

Specifications:

8000 kg

Maximum load

1250 mm

Coil width

415-620

Inner Ø of coil

RMSC-1250E/NC

Double-support decoiler RMSC-1250E/NC

Motorized double-support decoiler RMSC-1250E/NC. Is equipped with a reversible gear motor, 220 V electric cabinet and a 3-button remote operation panel.

Specifications:

8000 kg

Maximum load

1250 mm

Coil width

415-620 mm

Inner Ø of coil

Self-lifting

RMS-1250

Self-lifting roll decoiler RMS-1250

The self-lifting mechanism of the metal decoiler allows using the decoiler both on industrial facilities, and on small construction sites where there are no lifting devices.

Specifications:

8000 kg

Maximum load

1250 mm

Coil width

480-620 mm

Inner Ø of coil

Open side

KR-2,0

Non-powered cantilever decoiler KR-2,0

Designed for uncoiling a metal strip coiled in a 2 000 kg roll and up to 350 mm wide. The Expanding of the support bars synchronously by rotation of the handwheel. Equipped with a system to prevent unwinding by inertia.

Specifications:

2000 kg

Maximum load

10-350 mm

Coil width

380-630 mm

Inner Ø of coil

KR-2,0 NC

Motorized cantilever decoiler KR-2,0 NC

Motorized cantilever decoiler KR-2,0-NC is designed for uncoiling a band up to 350 mm wide and a roll weighing up to 2 000 kg. Equipped with a non-contact sensor to control the sagging of the strip.

Specifications:

2000 kg

Maximum load

10-350 mm

Coil width

380-630 mm

Inner Ø of coil

KR-5,0

Powered cantilever decoiler KR-5,0

Powered cantilever decoiler KR-5,0 is designed for uncoiling up to 1250 mm wide and a coil weght up to 5 000 kg. Equipped with a non-contact sensor to control the sagging of the strip.

Specifications:

5000 kg

Maximum load

1250 mm

Coil width

480-630 mm

Inner Ø of coil

KR-7.5

Powered cantilever decoiler KR-7,5

Powered cantilever decoiler KR-7,5 is designed for uncoiling up to 1250 mm wide and a coil weght up to 7 500 kg.

Specifications:

7500 kg

Maximum load

1250 mm

Coil width

550-650 mm

Inner Ø of coil

KR-10

Powered cantilever decoiler KR-10

Powered cantilever decoiler KR-10 is designed for uncoiling up to 1250 mm wide and a coil weght up to 10 000 kg.

Specifications:

10 000 kg

Maximum load

1250 mm

Coil width

550-650

Inner Ø of coil

Metal sleeting

Sleeting and cutting machines

SPR-1250/3-R

Manual slitting machine SPR-1250/3R

Light manual cutting machine, useful slitting width 1250 mm, 0,7mm, manual transversal cut by extra roller shear.

Specifications:

5 m/min

Speed

0,35 - 0,8 mm

Soft steel thikness

up to 1250 mm

Max.coil width

SPR-1250/3-A

Light semi-electric slitting and cutting unit SPR-1250/3-A

Light semi-electric cutting machine, useful sleeting width 1250 mm, 0,7mm, electric uncoiling, manual transversal cut by extra roller shear.

Specifications:

6 m/min

Speed

0,35-0,8 mm

Soft steel thikness

1250 mm

Max. coil width

SPR-1250/5-A

Semi-electric slitting and cutting unit SPR-1250/5-A

Semi-electric slitting and cutting machine, useful slitting width 1250 mm, up to 1.5 mm, electric uncoiling, manual transversal cut by extra roller shear.

Specifications:

10 m/min

Speed

0,3-1,5 mm

Max. thickness

1250 mm

Max. coil width

SPR-1250/10-A

Semi-electric slitting and cutting unit SPR-1250/10-A

For slitting and length cutting of sheet and coiled metal. Electric uncoiling, 10 sets of disc cutters, manual transversal cut by extra roller shear.

Specifications:

10 m/min

Speed

0,35-1,5 mm

Soft steel thikness

1250 mm

Max. coil width

SPPR-1250/5-NC

Compact cutting line with automatic SPPR-1250/5-NC

Cutting and slitting line with a numerical control, as standart 5 sets of cutter blades, transversal roller shear.

Specifications:

10 m/min

Speed

0,35-1,5 mm

Soft steel capacity

1250 mm

Max. coil width

Profile production

Palisade Pales

Line for Metal Palisade Pales production

“Metal picket fence” series machines are designed for production of metal “Palisade Pales” wich is the main components of palisade fencing.

Specifications:

7 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

1.5 kW

Drive power, kW

Knauf profiles

Mobile line for CD and UD gypsum board profile production

Roll forming machines is designed for producing Knauf profiles, which are used to construct a metal frame to provide support for plasterboard panels.

Specifications:

20 m/min

Production speed

0,4-0,7 mm

Soft steel capacity

2,2 kW

Drive power

Gutter production

Gutter machines

Line is intended for production of a half-round or shaped gutters from thin-sheet galvanized steel 0,4-0,6 mm of thickness with plastisol or pural coatings. Gutter is one of the elements of the rain ware system responsible for draining rainwater and meltwater from the roofs of buildings.

Specifications:

10 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

3,7 kW

Drive power

Screed strip (spackling angle)

Line for producing screed strip (spackling angle)

Roll forming machine MCh-10х23.05 is designed to produced a “screed strip/spackling angle” profile used for plastering of surfaces.

Specifications:

10 m/min

Production speed

0,4-0,5 mm

Soft steel capacity

1,5 kW

Drive power

Plastering angle

Line for producing “Plastering angle” profile

Roll forming machine Mobiprof YP-23x23.1xR1.05 is designed for producing “Plastering angle” profile used for plastering of surfaces.

Specifications:

10 m/min

Production speed

0,4-0,5 mm

Soft steel capacity

1,5 kW

Drive power

Furring/omega profile

Omega channel rollforming machine

SPO roll forming machines are designed for production of omega- (furring) cannels.

Specifications:

15 m/min

Production speed

2,0 mm

Soft steel capacity

2,2 kW

Drive power

С- & U- chanels

С- or U- chanels roll forming machine

SPP and SPS series roll forming machines are designed for production of U- and C- channels from blancs required width or coiled strip with maximum thickness 2,0 mm.

Specifications:

10 m/min

Production speed

2,0 mm

Soft steel capacity

3,5 kW

Drive power

L- profile

Line for producing L- shaped profiles

YP series shaping machines are designed to produce L- shaped profiles (angles).

Specifications:

10 m/min

Production speed

2,0 mm

Soft steel capacity

2,2 kW

Drive power

Z- profile

Roll forming machine to produce Z- profile

ZP series shaping machines are designed to produce Z- shaped profile from galvanized steel сapacity up to 1.5 mm.

Specifications:

10 m/min

Production speed

0,5-1,5 mm

Soft steel capacity

2,2 kW

Drive power

Garden bed guarding

Garden bed guarding roll forming machine

Mobiprof SPS-225x20-80x80.05 roll forming machine is designed to produce C- chanel, which is used as a garden seedbed fences posts.

Specifications:

up to 15 m/min

Production speed

0,5 mm

Soft steel capacity

3,0 kW

Drive power

Wall panel

Wall panel machines

SO series roll forming machines are designed to produce metal siding from light gauge galvanized steel with polymer coating: polyester, plastisol.

Specifications:

10 m/min

Production speed

0,4-0,7 mm

Soft steel capacity

2,2 kW

Drive power

T- chanel

T- purlin roll forming machine

TP series roll forming machines are designed to produce T- channels.

Specifications:

10 m/min

Production speed

0,5-1,5 mm

Soft steel capacity

3,0 kW

Drive power

Heat spreading plate

Line for heat spreading plate shapes

The machine is intended for profiling heat spreading plates applied for construction of heating floor.

Specifications:

7 m/min

Production speed

0,4-0,8 mm

Soft steel capacity

0,75 kW

Drive power

Drift eliminator

Drift eliminator roll former

Roll forming machine VlnP.R19-39x205.Зv.07 is intended for profiling of “Drift eliminator” profile from thin-sheet galvanized steel up to 0,7 mm of thickness.

Specifications:

10 m/min

Production speed

0,45-0,7 mm

Soft steel capacity

3,0 kW

Drive power

Ridge cap

Ridge cap roll former

The machines are designed for producing “ridge cap” or “neck cap” profiles of 0.4 to 0.6 mm steel with different types of polymer coating.

Specifications:

7 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

1,5 kW

Drive power

Flat hem roll former Zv-0,5

Zv-0,5 Flat hem roll former

Roll forming machine is intended for rolling of edges from thin-sheet galvanized steel 0,4-0,5 mm of thickness. Rolling is proceed in two passes - first one side, then the other.

Specifications:

6 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

0,75 kW

Drive power

Flat hem roll former Zv.R

Zv.R Flat hem roll former

Dual sided hemming machine is intended for rolling of edges in a single pass from thin-sheet galvanized steel 0,4-0,5 mm of thickness. The machine with stepless width adjustment from 90 mm to 690 mm conveniently via handwheel.

Specifications:

7 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

0,75 kW

Drive power

Fencing blinds

“Fencing blinds” roll former

“Fencing blinds” profile roll forming machine is intended to produce metall profile (lamellas) used for “Blinds” type fence construction.

Specifications:

10 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

3,0 kW

Drive power

Window trim

Window trim roll former

PK series shaping machines are designed for production of “Window trim” profile made of coiled galvanized steel or steel with polymer coating, 0.4 to 0.6 mm thick. The shape rolling is performed in two passes - one side at a time.

Specifications:

6,5 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

0,75 kW

Drive power

Window drip cap

Roll forming machine for "Window drip cap" profile

PK.R series roll forming machines are equiped with stepless width adjustment and the machines are intended for profiling “Window drip cap” profile in a single pass.

Specifications:

7 m/min

Production speed

0,4-0,8 mm

Soft steel capacity

0,75 kW

Drive power

Decorative cover

Roll froming machine for decorative profile “Cover”

The machine produces decorative profile “Cover” which is used for covering the aluminium clamping shape of glass structures.

Specifications:

10 m/min

Production speed

0,7 mm

Soft steel capacity

2,2

Drive power

Shaped rings CUU-74.10

Shaped rings roll forming machine

MOBIPROF CUU15х18-74.10 roll forming machine is designed to produce metal shaped rings from galvanized steel сapacity up to 1,0 mm.

Specifications:

10 m/min

Production speed

1,0 mm

Soft steel capacity

0,75 kW

Drive power

Shaped rings CUU-K420

Shaped rings roll forming machine CUU-K420

CUU-K420 roll forming machine is designed to produce metal "shaped rings" profile wich is used as garbage chute of cylindrical channel of the Sandwich-type.

Specifications:

10 m/min

Production speed

1,5 mm

Soft steel capacity

up to 6 kW

Drive power

Metall plate lining

Metall plate lining roll former

Metal plate lining roll forming machine is intend to produce “metal cover” profile which is used for production “Sandwich” type panels.

Specifications:

6 m/min

Production speed

0,4-0,7 mm

Soft steel capacity

1200 mm

Infeed width

Curtain rod blinds

Curtain rod blinds roll former

Roll forming machines for “Curtain rod blinds " profile, for production of special shapes applied in design of horizontal aluminium blinds.

Specifications:

10 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

1,5 kW

Drive power

PVC windows reinforcements

Pvc windows reinforcements

The line is intended for profiling of open and closed profiles for armoring of items from PVC from thin-sheet of galvanized steel 1,5-2,0 mm of thickness.

Specifications:

10 m/min

Production speed

1,0-2,0 mm

Soft steel capacity

2,2 kW

Drive power

Growing gutter

Line for growing gutter production

TL series roll forming machines for producing growing gutter shapes, applied in a greenhouse facility for growing crops using hydroponics technology.

Specifications:

10 m/min

Production speed

0,7 mm

Soft steel capacity

3,0 kW

Drive power

Metal folding

Folding machines

Manual

LTB-2000/0,8

Folding machine LTB-2000/0,8

Is designed for manufacturing the whole range of products for building roof and faces made of up to 0.8 mm steel.

Specifications:

2040 mm

Folding length

0,8 mm

Capacity zinc / steel

155°

Max folding angel

LTB-2500/0,8

Folding machine LTB-2500/0,8

Is designed for manufacturing the whole range of products for building roof and faces made of up to 0.8 mm steel.

Specifications:

2540 mm

Folding length

0,8 mm

Capacity zinc / steel

155°

Max folding angel

Мetal roofing production

Standing Seam Roof Machines

SFP-700

Double standing seam machine SFP-700

It has high versatility and mobility. Produces roofing panels with both single and double standing seam at the job site.

Specifications:

250-700 mm

Infeed width

0.45-0.7 mm

Galvanized steel

25 mm

Lock height

SFP-700 LITE

Double standing seam machine SFP-700 LITE

The budget version of the roofing machine SFP-700, is popular with professional roofers for many years. The machine does not have the 6th сalibration mill stand.

Specifications:

250-700 mm

Infeed width

0,45 - 0,7 mm

Galvanized steel

25 mm

Lock height

SFP-700 KOMPACT

Standing seam roll forming machine SFP-700 KOMPACT

Mobile, compact and lightweight, suitable for frequent relocations. Produces roofing panels with both single and double standing seam at the job site.

Specifications:

SFPR

Standing seam machine SFPR

The machine with stepless width adjustment from 320 mm to 700 mm conveniently via handwheel. SFPR allows to produce high quality roof panels with double or single standing seam

Specifications:

320-700 mm

Infeed width

0,45 - 0,7 mm

Galvanized steel

25 mm

Lock height

SFPR-NC

Standing seam roll forming machine SFPR-NC

Standing seam roll forming machine SFPR-NC with numerical control produces roofing panels with both single and double standing seam at the job site.

Specifications:

250-250 mm

Infeed width

0,45 - 0,6 mm

Galvanized steel

25 mm

Lock height

SFP-1250

Standing seam rollforming machine SFP-1250

Universal machine for onsite work to produce double standing seam profiles 25 from blanks or cut lengths in a single pass with width 1250 mm.

Specifications:

SFPZ

Snap lock roll forming machine SFPZ

Produces roofing panels with single snap lock seam, the distinctive features of which are simple and quick installation of the panel without the use of special tools, hidden mounting system, allow for thermal expansion of the material.

Specifications:

250 - 625 mm

Infeed width

0,5 - 0,7 mm

Galvanized steel

32 mm

Lock height

Standing seaming tool

Set of hand seamers

The steel lock hand seamer manufactured by MOBIPROF are designed for closing of double standing seam one by one in two steps.

Specifications:

0,4-0,7 mm

Max. thickness

25 mm

Lock height

220 mm

Size

Hand Seamer with bronze plates

Hand seaming tool with bronze plates and seam hooks

Hand tool with bronze plates and seam hooks. It is optimal for work on metal with polymeric coating and copper.

Specifications:

0,4-0,6 mm

Max. thickness

25 mm

Lock height

220 mm

Size

Semi-automatic seaming tool

Semi-automatic seaming tool used for closing locks on a double standing seam roofing panels.

Specifications:

0,4-0,6 m

Max. thickness

25 mm

Lock height

5,5 kg

Weight

Power seamer FZM

Seaming machine FZM

Universal seaming machine unit FZM for seaming angular and double standing seams with a single pass.

Specifications:

0,45-0,7 mm

Galvanized steel

25 mm

Lock height

5 m/min

Operating speed, m/min

Rain water system

Swaging-beading machine

ZRM-0,8

Manual swaging-beading machines ZRM-0,8

Flanging, crimping, rolling rifts. Manual drive, 4 pairs of rollers.

Specifications:

0,8 mm

Capacity Steel S235JR

50 mm

Vertical distance

180 mm

Throat depth

ZEM-0,8

Electric swaging-beading machine ZEM-0,8

Flanging, crimping, rolling rifts. Reversible electric drive control by simple pedal, 4 pairs of rollers.

Specifications:

0,8 mm

Capacity Steel S235JR

50 mm

Vertical distance

180 mm

Throat depth

Lock sem closing machine

FOS.R-1300/0,8

Lock sem closing machine FOS.R-1300/0,8

Is designed to lock sem closing machine during production of air ducts and rain water systems.

Specifications:

0,8 mm

Max. sheet thikness

1300 mm

Operation length

2500 mm

Max. length of workpiece

FOS-1300/0,8

Lock sem closing machine FOS-1300/0,8

Is designed to lock sem closing machine during production of air ducts and rain water systems. Reversible electric drive control by simple pedal.

Specifications:

0,8 mm

Max. sheet thikness

1300 mm

Operation length

2500 mm

Max. length of workpiece

Gutter

Gutter production

Gutter forming machine

Equipment is intended for production of a gutter from thin-sheet galvanized steel 0,4-0,6 mm of thickness with plastisol or pural coatings. Gutter is one of the elements of the rain ware system responsible for draining rainwater and meltwater from the roofs of buildings.

Specifications:

10 m/min

Production speed

0,4-0,6 mm

Soft steel capacity

3,7 kW

Drive power

Custom made Machinery

Menu

About

Info

Delivery

Contacts

Exhibitions

Upcoming exhibitions

02

April 2020

The 26-th international construction and interior exhibition MosBuild 2020 in Moscow.

04

November 2019

BATIMAT, THE CONSTRUCTION TRADE SHOW, Parc des expositions - Paris Nord Villepinte

02

April 2019

The 25-th international construction and interior exhibition MosBuild 2019 in Moscow.