Double standing seam machine SFP-700 LITE

The key difference between SFP-700 LITE and SFP-700 is that machine does not have the 6th сalibration mill stand.

Using a сalibration mill stand, fine tuning to the required metal thickness and type is performed. It allows to eliminate the screw-shape effect on the panel being rolled. In respect of other parameters, SFP-700 Light is as good as the high-end model.

The machine is lightweight and small-sized which allows lifting it onto the roof easily and roll roof panels on the job site. The machine manufactures panels with single and double standing seam of straight and trapezoidal form using all types of coiled roofing metal or preliminarily prepared sheets of the required length and width.

The profile width is adjusted stepwise by moving the shaping roller on one side of the machine by the desired width.

* On the photo, the machine is shown with additional equipment.

Benefits

possibility of installing additional bead rollers for half round or trapezoidal type of ribs;
it is possible to install an additional set for forming arch-shaped roofing patterns;
movable guides allow adjusting the seam size if required;
jointly treated bearing high rigidity, perfect parallelism and alignment of the shafts;
to support the center of the panel being rolled, the shaping mechanism is equipped with additional rollers;
it is ideal for use on a construction site due to its light weight and equipment overall dimensions.

Specifications

Infeed width, mm<	250-700
Soft steel thickness	0,45-0,7
Lock height, mm	25
Operating speed, m/min	6
Supply voltage, V	380/3-Ph
Drive power, kW	0,75
Dimensions, LхWхH, mm	1450х870х830
Weight, kg	135

Cost and availability

Price
Stock availability	in stock

Options

HP-700	17 000 rub.
Sets of bead rollers "half round"	0 rub.
Sets of bead rollers "trapezoidal"	0 rub.
Variable-frequency inverter	0 rub.
Kit for profiling 0.7 mm steel thikness	0 rub.
Kit for standing seam curving "ARC"	0 rub.
Entrance end manual cutter	0 rub.
Length measuring wheel	0 rub.